Dacor Dishwasher Wartungshandbuch PDF herunterladen (Seite 12)

Low Water Level Switch (continued)

Checking Low Water Level Switch

Disconnect power to dishwasher.

Gain access to electronic control and check between P3-9 (orange wire) and P3-8 (white wire).

This should be an open contact.

These wires are connected to center terminal #1 and terminal to the right of center #3.

Add water to sump to close switch. (See Figure 10)

High Water Level Switch

The high water level switch is a back up, or safety, for the low water level switch. The high water level

switch is placed in series with the drain pump. If the low water level switch fails to close, the drain

pump starts automatically. The high water level switch is an open switch. It is connected to the sump

by a separate hose.

FIGURE 10

Low Water Level

Switch will close at

this level

FIGURE 11

Low Water LevelHigh Water Level

Check between

these two terminals

Check between

these two terminals

Page 3-5

DaCor builT-in Dishwasher serviCe Manual

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Keine Kommentare

Dacor Dishwasher Wartungshandbuch Seite 12