Dacor CM24P-1 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 32)

Accessing the Main Programming Menu:

Remove the drip tray. Unlock the front panel door. When the door is open, the buttons on the front

of the unit will not make drinks when pushed. “Machine Off - Front Panel Open” should appear on

the display. If it does not, find the white button on the back of the front panel door. Push and

release the white button. Check to make sure “Machine Off - Front Panel Open” appears on the

display. With the front panel door open, push and release the far left button on the front panel (the

one with “MENU” above it). Nothing will appear to happen. Pull out on the white button on the back of the front panel door. You will hear the normal sound of the

tamping motor cycling. In about 5 seconds “Cumulative” will appear on the display. The unit is now in the manual-programming mode. You will use the four

buttons on the left of the front panel to program it. The drink functions on the buttons are ignored during the programming process.

Feature Menus

Cumulative Total:

The cumulative total feature allows you to view the total number of drinks made by your coffee system and the number of individual drinks made. It is not

programmable. To view the number of drinks made:

1. With “Cumulative Total” displayed on the main programming menu, push the MENU button.

2.To check each drink individually, repeatedly push the MENU button.

3. Push SET to exit.

4. Push the DOWN button repeatedly to select a feature to change or close the front panel door to exit the main programming menu.

Changing the Button Assignment:

1. With the main programming menu accessed, push the UP or DOWN button repeatedly until “Product Name” appears on the display. “Product Name”

changes the type of drink programmed for each button.

2. Push the MENU button.

3. Repeatedly push the MENU button to see the drink assigned to each button. Each drink type shown has a number in the upper right of the display. The

number represents the button programmed for this drink. 1 is the button on the far left, 2 is the next button to the right and so on. Stop on the button number you

want to change.

4. To select a drink for the button number shown, scroll using the UP or DOWN buttons until you find the desired beverage.

5. Push the SET button to change to the new drink type.

6. Push the UP or DOWN repeatedly to select another feature to change or close the front panel door to exit the main programming menu.

Changing the Amount of Water:

1. With the main programming menu accessed, push the UP or DOWN button repeatedly until “Water Volume” appears on the display.

2. Push the MENU button.

3. Repeatedly push the MENU button to see the amount of water (in CCs) dispensed with each drink. Stop on the drink for which you want to change the amount

of water dispensed.

4. To adjust the water amount, push the UP or DOWN buttons.

5. Push the SET button to change to the new water amount.

6. Push the UP or DOWN button repeatedly to select another feature to change or close the front panel door to exit the main programming menu.

Changing the Grind Time:

1. With the main programming menu accessed, push the UP or DOWN button repeatedly until “Grind Time” appears on the display.

2. Push the MENU button.

3. Repeatedly push the MENU button to see the grind time for each drink. Stop on the drink for which you want to change the grind time.

4. To adjust the grind time, push the UP or DOWN buttons.

5. Push the SET button to change to the new grind time.

6. Push the UP or DOWN button repeatedly to select another feature to change or close the front panel door to exit the main programming menu.

Changing the Milk Time:

1. With the main programming menu accessed, push the UP or DOWN button repeatedly until “Milk Time” appears on the display.

2. Push the MENU button.

3. Repeatedly push the MENU button to see the milk time for each drink. Stop on the drink for which you want to change the milk time.

4. To adjust the milk time, push the UP or DOWN buttons.

5. Push the SET button to change to the new milk time.

6. Push the UP or DOWN button repeatedly to select another feature to change or close the front panel door to exit the main programming menu.

Dacor Coffee System Programming:

Models: CM24T and CM24P

PG: 32

1 2 ... 27 28 29 30 31 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Dacor CM24P-1 Anleitung zur Fehlerbehebung Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kaffeemacher Dacor CM24P-1